3D Airflow
An advanced air flow technology that distributes air in the room in three dimensions, ensuring maximum comfort and efficiency. The airflow can be adjusted both horizontally and vertically.
I-Feel Function
The thermometer built into the air conditioner's remote control senses the temperature of the surrounding air and transmits it to the indoor unit. With this function, the air conditioner adjusts the temperature and fan speed according to the position of the remote control.
8°C Tempering
The air conditioner maintains a stable indoor temperature of 8°C, preventing the freezing of water systems during winter, especially in properties that have not been used for a longer period.
G10 Inverter Technology
The essence of inverter air conditioner operation is that the compressor does not switch on and off; its speed is always adjusted to the appropriate cooling or heating load, i.e. to the heat demand.
Intelligent Defrosting
The control panel continuously monitors operational data, and based on the readings from the temperature sensors, it initiates an intelligent defrost cycle at predetermined intervals.
Energy-Saving Mode
When this function is activated in cooling mode, the set temperature is adjusted to a fixed value and the fan runs at a low speed, thereby saving energy.
H-Tariff Available
The so-called "H tariff" is available for heat pumps and split air conditioners during the period from October 15 to April 15, with a fee that, as defined by regulation, can never be higher than the current regulated price.
Compressor Housing and Drip Tray Heating
Heating the drip tray prevents the accumulation and freezing of condensate in the outdoor unit. In addition to cooling, the unit is also capable of continuous heating during winter.
Automatic Mode
The unit selects the operating mode based on the indoor temperature.
WI-FI CONTROL
Tosot units equipped with Wi‑Fi can be controlled from anywhere in the world via the internet using a smartphone.
