3 D airflow automatic lamella movement+up and down
Advanced airflow control technology used by modern climates to even distribute air in the room. The term "3D" suggests that the climate can move the air in three -dimensional directions.
Cartridge heating
The compressor heats the oil sprinkle to prevent the oil and refrigerant from mixing. Carter heating is important for heat pump air conditioners that operate in heating mode.
7 -speed fan
The device's fan speed can be adjusted in seven different steps. This provides an opportunity to finely control the intensity of the airflow.
8 degrees Temperature
All you need is one button. Press this button to operate in accordance with the user settings saved in memory.
A +++ energy class
The climate consumes very little energy compared to its cooling and/or heating power. In the long run, they result in lower operating costs.
Automatic defrosting
Contrary to conventional thawing systems, which have been melted at pre -set intervals (even every hour), this smart system only runs this program, if necessary, thereby saving energy.
Automatic lamella movement
Lamelles can be automatically adjusted to the desired position with the remote control. This function provides a more pleasant temperature distribution in the room.
Cold plasma ionizer
An electrostatic filter that first polarizes dirt and then removes them electrostatic. Reduces the concentration of the dust dust.
Quiet mode
Its purpose is to minimize the noise level of the climate. This mode can be useful when you need low noise levels. In silence mode, the air conditioner works with lower power.
Drip tray
It is used to heat the drip tray in the inner unit of the climate. Prevents freezing water in the drip tray, especially in cold weather.
Night mode
Night mode automatically modifies the temperature and the fan speed for relaxed sleep. The fan speed automatically lower, so the air conditioner operates quieter.
Temperature display
The device display shows the current or set temperature. This feature helps the user easily check and control the desired temperature in the room.
I Feel Function
When using the "I Feel" function, the air conditioner not only uses the indoor unit sensor to measure the temperature, but also the temperature sensor built into the remote control.
Intelligent preheat
This is a feature that optimizes the start of the heating mode to avoid cold air before the heat exchanger warms up properly. The climate can be used more efficiently and conveniently.
LED display
The LED display is a digital display with built-in light emissions (LEDs). Allows the user to easily read different settings and status signals.
Clock setup/display
The device has an integrated watch where the exact time can be set and displayed on the display. The user can set the climate exactly when to turn on or off, adjusting the timing to the watch.
Dehumidification function
The device can reduce the humidity in the air without significantly changing the temperature. Reduces the moisture content of the air and improves indoor air quality.
Self -diagnosis
This is an intelligent system that allows the device to automatically recognize and report problems during operation. The climate is capable of displaying error codes or warning signs on the display.
Turbo function
It allows the device to provide maximum power during cooling or heating in a short period of time. In turbo mode, the air conditioner operates at higher speeds, so it cools or heats the room quickly.
Timing function
The automatic operating time of the air conditioner can be set with the timer for a given time interval. It helps to avoid unnecessary operation and set up to stop or start automatically.
Wifi control
The device can be connected to a WiFi network and can be controlled remotely from a smartphone, tablet or computer using a special application.
Automatic reboot
The device automatically returns to the previously set operation mode after a power failure or other power outage when the power supply is restored.
Lock function
This is a safety feature that allows the user to lock the device settings. The purpose of this is to prevent the climate from accidental or unauthorized modification.
